Funk-Electronic Piciorgros GmbH
TMO-100V3
V3.70 - Page 172 of 284
4.6
Sending Restart (Reset) and Ok-Messages
Optional the TMO can transmit OK-Messages to indicate its presents and proper
operation within the TETRA network. This message is sent as an SDS and contains the
Device-Name and the Receive Field strength, displayed in -dBm.
This option can be enabled in “TETRA
→
SDS/Status/MMI” by entering the time
interval (in minutes) between two OK-Messages.
Configuration of the OK- and Restart Message
As soon as an ISSI as programmed into the ISSI-Field of the OK/Restart box, a message
will be sent to an individual or to a group, if the device restarts. That can be used to
monitor the device-, the network- and the power supply behavior of the remote TMO.