Funk-Electronic Piciorgros GmbH
TMO-100V3
V3.70 - Page 54 of 284
3.2.5
Black/Whitelist
The Black/Whitelist feature allows to control to which
TETRA cells the TMO-100 should preferred register, which
cells should be avoided and to which cells the TMO-100
should never register.
This allows a much tighter control of the distribution of
TMO-100's to TETRA base stations in a network than using
subscriber classes.
There are three different lists with up to 10 entries each.
3.2.5.1
Dynamic Blacklisting
It might appear in some networks that some base stations are not configured to have
Packet Data enabled while others are using this feature.
If the TMO-100 uses Packet Data it should be avoided that it registers to a cell which
can't use Packet Data. If the time is set to a different value than 0, the TMO-100 will
automatically black list a cell without Packet Data when it registers to it for the given
number of minutes.
In this case the TMO-100 immediately performs a cell reselection to a different cell.