Section VII. Retina Engrave V3
37
Section Review:
Do’s:
●
Remember there are three methods to importing a file. If one does not seem to be working for you, then
try the others.
●
Remember to use the Perimeter and/or Camera Capture options to align your design with your materials.
●
Remember that compound objects are made using the Grouping section.
●
Remember to adjust your object properties before running your project.
●
Remember that infills are used to fill in vector objects for engraving.
●
The laser can be stopped or pause using various methods, find the one that works best for you.
Don’ts:
●
Do not select any options on the photo icon if you want to be asked each time.
●
Do not run a project if your material is not secure. Brace it in some way before continuing.
●
Do not run multiple vector passes on something you don’t want to cut.
