manualshive.com logo in svg

Full Spectrum Laser MUSE MOPA, User Manual

Share
Download
Full Spectrum Laser MUSE MOPA User Manual Download Page 18

The touchscreen that comes on your MOPA allows you to control the basic functions of your 

laser without needing a computer. Jobs are accessible through the touchscreen once loaded in from 

the RE3 interface.

Home

The Home screen contains the devices IP address, the QR Code for 
RE3 and controls for the laser head.

Job History

The Job History icon allows the user to access previous projects. 
Selecting the File allows the user to view and re-run it.
No internet is needed to run the file saved here.

Tools

The tools icon allows the user to check and adjust the machine 
settings, enable rotary attachments, home the laser, and get 
information about the machine.

Network 

⇨

 Wi-Fi

Allows the user to connect to the Wi-Fi.

Mobile Version

A mobile version is available by scanning the QR Code or by inputting the device’s IP address 
into your phone's web browser. (See Connect to Software for more information)

Section III. Touchscreen Interface

17

Summary of Contents for MUSE MOPA


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands