Technical Support is available 8am-5pm PST. Monday - Friday
•
702-802-3103
7
Section I. Safety
Electrical Safety
CAUTION
Electrical Safety
• Do not open the machine while the unit is plugged in. Opening the machine
may expose the operator to the unit’s AC input power which is potentially
lethal.
• Never make or break any electrical connections to the system while the
unit is turned on.
• Never access the electronics area with hands or tools unless the unit is
disconnected from power for at least fifteen minutes.
The standard reference for laser safety is the American Standard for the Safe Use of Lasers, Z136.12000, developed
by the American National Standards Institute (ANSI). This reference is the basis for many of the federal regulations
for laser and laser system manufacturers, and for the Occupational Safety and Health Administration (OSHA) laser
safety guidelines. It contains detailed information concerning proper installation and use of laser systems. While
the ANSI standard itself does not have the force of law, its recommendations, including warning signage, training,
and the designation of a laser safety officer, may be compulsory under local workplace regulations when operating
laser systems above Class I. It is the operator’s responsibility to ensure that the installation and operation of the Full
Spectrum Laser Hobby Laser System is performed in accordance with all applicable laws. Copies of ANSI Standard
Z136.12000 are available from: LASER INSTITUTE OF AMERICA 12424 RESEARCH PARKWAY, SUITE 125
ORLANDO, FL 32826 (407) 3801553.
Summary of Contents for Muse Galvo
Page 1: ......
