manualshive.com logo in svg

Full Spectrum Laser Muse Galvo, Operation Manual

Share
Download
Full Spectrum Laser Muse Galvo Operation Manual Download Page 48

Technical Support is available 8am-5pm PST. Monday - Friday

 

 [email protected]

   •   

702-802-3103

   

47

The only positioning that matters in rotary mode is the X location. The Y position 

does not matter. Click the eye and the rotary will turn and show the rastering. To 

engrave a pattern evenly around a part, make sure the height of the drawing is equal 

to the circumference of the part.

NOTICE

Appendix A. Rotary Attachment

Rotary Calibration

After Rotary mode is enabled the icon on the Muse Pandora will change from the walk icon to the 

Z-Axis icon. Tapping on the icon switches the controls from Z-Axis to Rotary control. Hitting the 

arrows now will turn the rotary. You can return to Z-Axis controls anytime by clicking the Rotary icon.

Make sure when using the friction-type rotary that the object placed on it is level for a proper engraving. In 

rotary mode, engravings can only be made through rastering. In RE3 the rastering speed is what determines 

how quickly the rotary turns. The distance that the rotary will engrave is dependent on the height of the image 

that is being engraved. To engrave the entire circumference of the object then the height of the image should 

be equal to the circumference of the cylindrical object.

Summary of Contents for Muse Galvo



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands