manualshive.com logo in svg

Full Spectrum Laser Muse Galvo, Operation Manual

Share
Download
Full Spectrum Laser Muse Galvo Operation Manual Download Page 23

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

 

47

 

 SECTION VI. SOFTWARE 

Using RetinaEngrave v3.0 Software

 

In this section you will be introduced to the major interface features of RetinaEngrave 

v3.0.

 

Figure 6.1

 

RetinaEngrave v3.0 Software

Technical Support is available 8am-5pm PST. Monday - Friday

 

 [email protected]

   •   

702-802-3103

   

22

 

Cut (Ctrl+X): : Selected object or item is removed and added to clipboard.

 

Copy (Ctrl+C): Copy some portion of an object or item.

 

Paste (Ctrl+V): Paste a copied or cut portion of an object or item.

 

Delete (Del): Delete selected object or item.

 

Paste In Place (Shift+Ctrl+V): Paste a copied object or item in same location.

 

Paste Inside Selection: Paste a copied object or item inside selected area.

 

Paste Style (F4): Paste and match style.

 

Duplicate (Ctrl+D): Create a copy of a selected object.

 

Clone (Shift+Ctrl+D): Create an exact copy or ‘clone’ of an object.

 

Select All (Ctrl+A): Select all items in work screen.

 

Deselect All (Shift+Ctrl+D): All items in work screen are deselected.

 

Invert Selection (Ctrl+I): Items previously selected are now unselected and items unselected are selected.

 

Select by Font Type: Select item by font type.

 Settings: 

Displays settings menu.

 

Materials: Provided user with engraving settings for specified materials. 

 

Activate user profiles

Modify
 

Arrange

  Send to Front (Shift+Ctrl+Up): Send an object to the front layer.
  Bring Forward (Ctrl+Up): Send an object one layer forward.
  Send Backward (Ctrl+Down): Send an object one layer backwards.
 

 

Send to Back (Shift+Ctrl+Down): Send an object to the back layer.

 

Align

  Align Left: Align object to the left. 
  Align Center: Align object to center. 
  Align Right: Align object to right.
  Align Top: Align object to top.
  Align Middle: Align object to middle.
  Align Bottom: Align object to bottom.
  Same 

Width: 

All selected objects convert to same width.

  Same Height: All selected objects convert to the same height. 
  Distribute Horizontally: Evenly arrange selected objects horizontally. 
  Distribute Vertically: Evenly arrange selected objects vertically.
  Snap to Full Units: Snap to grid as full units.
  Snap to Half Units: Snap to grid as half units.
 

Transform

  Rotate 45° Left: Rotate selected object left 45°. 
  Rotate 90° Left: Rotate selected object left 90°. 

Edit (Continued)

Summary of Contents for Muse Galvo



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands