6.ELECTRICAL PRECAUTIONS
BEFORE INSTALLING THE CONTROLLER, WE RECOMMEND THAT THE FULL READING OF THE INSTRUCTION MANUAL BE DONE, IN
ORDER TO AVOID POSSIBLE DAMAGE TO THE PRODUCT.
PRECAUTION WHEN INSTALLING THE PRODUCT:
-Before performing any procedure on this instrument, disconnect it from the power supply;
-Certify that the instrument has adequate ventilation, avoiding installation on panels that contain devices that may cause it to operate outside the
specified temperature limits;
-Install the product away from sources that may generate electromagnetic disturbances, such as: motors, contactors, relays, solenoid valves, etc.
AUTHORIZED SERVICE:
-Installation or maintenance of the product must be performed only by qualified professionals.
ACCESSORIES:
-Use only Full Gauge Controls original accessories;
-In case of doubt, contact technical support.
BEING IN CONSTANT DEVELOPMENT, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE ANY INFORMATION IN THE MANUAL
AT ANY TIME, WITHOUT PRIOR NOTICE.
5.TECHNICAL SPECIFICATIONS
Controller operating temperature
0 to 50°C
Supply
Maximum consumption
24Vac 50/60Hz or 24Vdc 10%
Operating humidity
Type action
Voltage output for pressure sensors
Analog outputs
Analog inputs
Digital inputs
Control pressure
Pollution degree
Pressure resolution
Software class
Control temperature
Temperature resolution
USB Interface
RS-485 communication interface
10 to 90% UR (without condensation)
Type 1.B
-14,7 to 850psi / -1,0 to 58,7 bar
II
0.1 psi / 0.1 bar
Class A
-50 to 200°C / -58 to 392°F
0.1°C / 0.1 °F across all range
Product dimensions (LxAxP)
70,0 x 135,7 x 61,7 mm (2,76" x 5,34" x 2,43")
Digital outputs
O1, 05
and
O6
: relay output (SPST) NA, 5(3)A/250Vac;
O2, O3
, and
O4
: output with solid state relay (SSR) 1A/24 - 240Vac
Compatible with the USB 2.0 Full-Speed Module (USBFS) standard;
Data format for FAT32 pendrive / Maximum size of 32GB pendrive
RS485-1
: Not insulated
RS485-2
: Insulated
EXP
: Communication with expansion modules
500mA ac/dc
S1 to S6
: Configurable between pressure sensor (4 to 20mA / SB69) or
temperature sensor (SB19, SB41, SB59, SB70);
A1
000000000000000000000
A2
000000000000000000000
= 0-10Vdc (max. 10mA)
Voltage 12V: 12Vdc, Idcmax= 120mA;
I1
to
I5
: dry contact type digital inputs.
Hi1
to
Hi3
: Isolated digital inputs, with maximum voltage equal to the supply
voltage (24V)
±
6
