12
ASSEMBLY (cont.)
Placing the work table (1)
There are 4 rollers to guide the work table (1) and 4 location brackets used to limit
the sideway movement of work table, ensure that the work table is correctly put
on the machine, wrong install may lead to unstable movement and falling of the
work table while moving (fig. 9).
Fig. 9
Fitting the diamond cutting disc (7)
Refer to the maintenance section for details
on fittings and replacing the cutting
disc (fig. 10).
Fig. 10
WARNING!
Only use a wet cutting,
350mm Diamond cutting disc rated
to at least 3,000 RPM on this tool.
Do not use a Disc that is too thick to
allow Outer Flange to engage with
the flats on the Spindle.