8
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety
• Young children should be supervised to ensure that they don’t play with the
appliance.
• Wet hands
- Never touch the electrical components of the machine (e.g. switches) with
wet hands.
• Plug connections
- All plug connections must be located in a dry place and must not lie
on the floor.
• Cooling the cutting disc
- Make sure that the cutting disc is cooled with water during
the complete cutting process.
• Dry cutting
- Never carry out dry cuts with cutting discs designed for wet cutting.
• Dust mask
- Always wear a protective dust mask when cutting masonry.
• Diamond cutting discs
- Do not feed the masonry into the machine any faster than the
cutting disc can cut.
• Selecting the cutting disc
- Select the diamond cutting disc to suit the material you
want to cut.
• Assembling the cutting disc
- Before you install the cutting disc, check the spindle,
spindle nut and flanges for damage or a loose fit. Replace damaged or worn parts
without delay.
• Direction of rotation of the cutting disc
- Make sure that directional arrow on the
cutting disc coincides with the rotational direction of the motor shaft.
• Cutting disc spindle
- Make sure that the diameter of the hole in the cutting disc
conforms with the diameter of the cutting disc spindle on the machine.
• Cutting disc speed
- Do not exceed the safe operating speed of the cutting disc.
• Sanding/grinding with the cutting disc
- Do not try to use the cutting disc for sanding
or grinding jobs, i.e. to sand/grind the edge of a cut tile. Also, do not use the machine
for radius cuts or round cuts.
BRICK & MASONRY SAW SAFETY WARNINGS
IMPORTANT!
When using the equipment, a few safety precautions must be
observed to avoid injuries and damage. Please read the complete operating manual
with due care. Keep this manual in a safe place so that the information is available at
all times. If you give the equipment to any other person, give them these operating
instructions as well.
We cannot accept any liability for damage or accidents which arise due to a failure
to follow these instructions and the safety information.
IMPORTANT!
This brick & masonry saw is designed for wet cutting only.
