Full Boar FBBMS-20350 Instruction Manual Download Page 18

Page: 18 / 20

DESCRIPTION OF SYMBOLS

Read instruction manual

Caution, risk of cutting

Wear safety gloves

Ingress protection from water

min¯¹

Wear hearing protection

Wear safety eye protection

Wear safety footwear

Regulator compliance mark

Decibel (noise) rating

Switch off and remove plug from mains before adjusting, cleaning or if

the cord is entangled or damaged.

Radiant heat

Dangerous voltage

Danger! Keep hands and fingers clear of cutting disc.

I/h

Litres per hour

Note:

Ozito Industries will not be responsible for any damage or injuries caused

by the repair of the brick & masonry saw by an unauthorised person or by

mishandling of the brick & masonry saw.

• At regular intervals the trough water must be replaced. Start by removing the

work table (1) from the rail (15) and proceed to replace the dirty water with clean

water. Ensure the water trough (14) is free from debris

MAINTENANCE (cont.)

Summary of Contents for FBBMS-20350





















Search results

Summary of Contents for FBBMS-20350

Reviews:

Related manuals for FBBMS-20350

Brands by name

Popular brands

Full Boar FBBMS-20350, Instruction Manual

Search results

Summary of Contents for FBBMS-20350

Reviews:

Related manuals for FBBMS-20350

Brands by name

Popular brands