FULGOR ACCENTO Series, Use & Care Manual

Page: 32 / 138

EN
28
20 - Setting the Self-Cleaning Mode
Before using the Self-Cleaning Mode please read the Oven
Care and Cleaning page carefully and follow the Preparing
the Oven for Self-Cleaning first. (see page 37)
ATTENTION
Once the pyrolysis (self-clean) function has started, when
the flashing padlock symbol appears, DO NOT OPEN THE
DOOR and do not change the function.
Once the pyrolysis function is completed, the door will
automatically unlock when the oven’s internal temperature
drops below 100°C.
Do not force to open the door when the padlock symbol is
on or flashing.
Pyrolyse (Self-Clean)
Turn the mode knob in the proper position than press the +/-
knob to start a cleaning cycle.
The clean time can be set according to the same rules of the
automatic functions, and therefore the pyrolitic cycle can be
delayed.
The maximum allowed clean time is 3 hours, the minimum 1
hour. The standard time is 1h:30min, the clock display shows
P1:30. At the end of the self-cleaning activity the display shows
END steady. The writings on the display disappear when the
mode selector is placed in the ZERO position showing “- - -”.
The door remains locked until the oven temperature drops
below the safety threshold, at this time the control unlocks the
door.
The cooling fan starts as soon as the function is selected and
turns to its higher speed when the inner parts get hot. The oven
temperature is automatically set to 460°C in order to perfectly
clean the cavity.
The control also locks immediately the door in order to
guarantee the user safety, given that the temperature inside gets
very hot. A lock led shows the status of the latch mechanism
at any time:
- Door unlocked, lock led off.
- Door locked, lock led always on.
- Latch moving, transition in progress, lock led flashing.
To reuse the oven after a pyrolyse, turn the mode selector to
ZERO (OFF) position.
CAUTION
It is advisable not to use the hob during the pyrolysis function
(Self-clean)