9.Once an accurate piece count has been taken, the container and its
contents may be removed from the scale. After removal of the container
with the counted pieces, the scale will indicate the count is finished and
that a new count may be initialized by pressing the “C” key. The command “ -
- - -, COUNT FINISH, TO START COUNT PRESS C” will appear on the display
sequentially.
Important:
If more pieces have been placed into the container than
actually desired, you may use tweezers, a pharmacy spoon, or a similar
instrument to remove the excess while the container is still on the scale's
pan. You also may remove the container from the pan, dispense out the
excess pieces, and place it back on the pan to recheck the count. This may
be performed while the command “- - - - , COUNT, FINISH, TO START
COUNT PRESS C” is displayed, but before pressing the C key. Once the C
key is pressed the counting operation will reset and a new counting
transaction may begin.
22
I n s t r u c t i o n M a n u a l M o d e l D R X - 4 C
Note:
If filling does not begin while the command “Fill” is displayed, after
approximately 5 seconds the scale will display 0 pcs
And will begin waiting for the count to begin.
8.The display will now begin to indicate the
number of pieces placed in the container.
Note:
Steps listed in this chapter may be performed only if the drug has
been previously counted on the scale and it has been stored
In the scale's database
Summary of Contents for DRX-4C
Page 2: ......
Page 44: ...N O T E S ...