Fulcrum DRX-4C, Instruction Manual

Page: 32 / 45

I n s t r u c t i o n M a n u a l M o d e l D R X - 4 C
3. Once the scale has finished taring, “SCAN” will appear on the display
indicating you should scan the NDC code associated with the drug.
4. Once the code has been scanned, the word FILL will begin to flash on the
display for approximately 5 seconds. At any time during the FILL
command, press the sigma key ( ) to acknowledge you wish to modify the
data associated with the drug.
Note: If the verification feature is enabled, both the supply bottle NDC code
and the dispensing bottle NDC codes must be scanned to check for a
match. For more on the verification feature, please turn
to chapter 14 of this manual.
27
5. When the sigma key ( ) is pressed, the scale will allow the sample size and
sample weight to be adjusted. The scale will ask to select a new sample
size. Because the minimum sample size is 10 pieces, the scale
automatically selects “SPL-10” which is sample size 10. The sample may
be changed either to 30 pieces or 60 pieces by pressing the sigma key ( ).