Fukuda Denshi LX-7230N, Operation Manual

Page: 68 / 101

8. Operation
48
C A U T I O N
The ECG waveform size setting displayed on the LCD of the LX-7230N
does not interact with the one displayed on the screen of the receiving
monitor, because the LX-7230N cannot transmit the setting information of
the waveform size to the receiving monitor. If the ECG waveform size
displayed on the screen of the receiving monitor is changed, follow the
instruction in the operation manual of the receiving monitor.
<< Returning to ECG Display Screen (1) >>
Press the button to highlight
the Return button.
Press the Enter button to return to
the ECG display screen (1).
C A U T I O N
Do not operate the LX-7230N with the setup screen open to prevent the
settings to be changed due to an unintended operation. Make sure to press
the Return button to terminate the setup screen. The LCD display will
automatically turn itself OFF after 180 seconds if the Return button is not
pressed.
ECG Display Screen (2)
In the ECG display screen (2), the ECG waveform size displayed on the LCD
of the LX-7230N can be changed.
Setting Method
How to enter the setup mode:
Press and hold the Enter button for 2 seconds in the ECG display screen (2).
<< Changing ECG2 Waveform Size on LCD >>
The size indication of ECG 2 is
highlighted.
Pressing the Enter button will
sequentially change the size of
ECG 2.
Size ×1
×1/2 ×1