Fukuda Denshi CARDIMAX FX-7202, Service Manual

Page: 33 / 160

Maintenance
2 - 13
4. Processing that corresponds to the entered 4-digit figure is executed when
four [numeral] keys are tapped. (See the following correspondence table.)
Figure Description of processing
1024
・
Turns ON hard copy function.
・ Clears the secret number request message.
・
Goes to the [SET UP MODE (MAINTENANCE)] screen.
1025
・ Turns OFF hard copy function.
・
Clears the secret number request message.
・ Goes to the
[SET UP MODE (MAINTENANCE)]
screen.
3191 Turns ON re-analysis function at the time of file read.
9001 Goes to manufacturer self-diagnostics.
Others
・ Clears the secret number request message.
・
Displays the secret number re-enter message.
The hard copy function is not backed up if the power is turned off in the
state where the hard copy function is ON.
5. Entering "9001" on the [MAINTENANCE(PASSWORD)] screen allows
transition to the [SET UP MODE(MAKER MAINTENANCE)] screen, and
execution of the manufacturer self-diagnostics is permitted. Tapping a
diagnosis item allows transition to the applicable diagnosis screen.
6. Tapping [RESET] resets the Electrocardiograph and terminates manufacturer
diagnostics.
Reset the Electrocardiograph by tapping the [RESET] key, to return to
the inspection screen from the [SET UP MODE (MAKER
MAINTENANCE)] screen.
NOTE
NOTE
SET UP MODE (MAKER MAINTENANCE)
RESET
STATUS
TEST
SERIAL
TEST
MEMORY
TEST
RECORDER
TEST
TOUCH PANEL
TEST
INTERNAL MEM.
INITIALIZE
FX7402
UPDATE