![Fukuda Denshi CARDIMAX FX-7202 Service Manual Download Page 157](http://html.mh-extra.com/html/fukuda-denshi/cardimax-fx-7202/cardimax-fx-7202_service-manual_2344848157.webp)
Technical Instructions Related to EMC
8 - 5
Recommended distance of separation from portable telephone, etc.
The following shows the recommended distance of separation of the
equipment from portable or mobile RF communication devices.
Recommended distance of separation of equipment from portable or mobile RF communication devices
The equipment is intended to be used in the electromagnetic environment where the RF
interference is regulated. Client or user of the equipment can suppress the electromagnetic
interference by controlling the minimum distance between portable or mobile RF
communication device (transmitter) and this equipment as recommended below based on the
maximum output of the sending device.
Separate distance due to frequency of transmitter
m
Maximum rated
power output in W
of transmitter
26MHz to 80MHz
P
V
d
]
5
.
3
[
1
=
80MHz to 800MHz
P
E
d
]
5
.
3
[
1
=
800MHz to 2.5GHz
P
V
d
]
7
[
1
=
0.01
0.12
0.12 0.23
0.1
0.38
0.38 0.73
1
1.2
1.2 2.3
10
3.8
3.8 7.3
100
12
12 23
In case of a maximum rated power output not listed above, recommended distance of
separation d in terms of meters (m) can be determined by an equation corresponding to the
transmitter frequency. In the equation, P is the maximum rated power output in Watts (W) of
transmitter.
Note 1. In case of 80 MHz to 800 MHz, apply a high frequency band for the separate distance.
Note 2. The guideline does not apply to all circumstances. The electromagnetic diffusion is
affected by reflection and absorption by structure, thing and person.
Summary of Contents for CARDIMAX FX-7202
