Fukuda Denshi CARDIMAX FX-7202, Service Manual

Page: 27 / 160

Maintenance
2 - 7
Test Pattern
This section explains how to select the built-in electrocardiogram (ECG) test pattern
waveform to use during an operation check or demonstration.
1. Tap the [TEST PATTERN] key on the [SET UP MODE (MAINTENANCE)]
screen to go to the [MAINTENANCE (TEST PATTERN)] screen.
2. Select a test pattern and tap the [MENU] or [EXIT] key.
3. The following test patterns are available.
Pattern name Description
【 NONE 】
Test pattern waveform is invalidated.
【 NORMAL 】 Normal pattern waveform
【
PVC WAVE
】
Irregular heartbeat pattern PVC
Since test pattern information is not backed up, [NONE] is always
selected at the time of power ON or at the time of initialization.
4. By tapping the [MENU] key, the screen returns to the [SET UP MODE
(MAINTENANCE)] screen.
5. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
NOTE
MAINTENANCE (TEST PATTERN)
NONE NORMAL PVC WAVE
MENU EXIT