Fukuda Denshi CARDIMAX FX-7202, Service Manual

Page: 15 / 160

Component Names and Functions
1 - 3
Operation panel
The functions of the operation panel keys and lamps are outlined below.
(1) POWER ON/OFF (stby)] key
Press this key to switch the FX-7202 to power ON from standby status.
Press this key for 2 seconds or more to switch the FX-7202 from power ON
to standby status. Also, press this key for 5 seconds or more to turn OFF the
FX-7202 in case there is system trouble.
When you operate the FX-7202 on the rechargeable battery, use this key to
turn the power ON and OFF. If the power supply cord is connected to a
wall outlet and the rechargeable battery is installed, the FX-7202 will start
charging the battery as soon as the unit is placed in the standby status
(power is OFF).
(2) Charge lamp
The charge lamp lights in blue when the rechargeable battery is being
charged. The charge lamp turns amber if any trouble such as abnormal
battery temperature, battery voltage, or charge current occurs during
charging. If the Charge lamp turns amber when you try recharging, contact
your local Fukuda Denshi sales and service representative.
(3) LEAD [ ] and [ ] keys
Press these keys to change the leads to be monitored.
(4) [START/STOP] key
Press this key to start and stop the various recording (sampling) tasks.(7)
Main Power lamp.
This lamp lights during the standby and power ON status.
(5) [REVIEW] key
Press this key to perform Review Recording. Review Recording starts
printing waveforms from those sampled 10 seconds prior to pressing
[REVIEW] .
(4) START/
STOP
(7) RESET
(3)
LEAD switching
(1) Power ON/OFF
(6)
1mV
(5)
REVIEW
(2)
Charge lamp