BACnet Gateway for VRF System
INSTRUCTION MANUAL r1.4.0 eng
132/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
Low Noise Operating status table
Low Noise Operation Status can be checked using the values in the following correspondence table.
A single low noise operation value of outdoor unit, represents 3 different operation values:
Lv/A/E
Lv: Low noise level (bigger value for lower noise)
A: Ability to support both low noise and air conditioning performance when performance priority is
specifiedagainst low noise operation. Low noise operation will not be activated if performance priority is
specified andthis value is set.
E:Simultaneously controlled through external input of outdoor unit.
If this value is set, the actual low noise operation will also depend on the external input signal connected to
the outdoor unit.
Pesent_Value
Contents displayed in State_Text
Pesent_Value
Contents displayed in State_Text
1
Not Set
9
2/-/-
2
-/-/E
10
2/-/E
3
-/A/-
11
2/A/-
4
-/A/E
12
2/A/E
5
1/-/-
13
3/-/-
6
1/-/E
14
3/-/E
7
1/A/-
15
3/A/-
8
1/A/E
16
3/A/E
