TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
38 of 47
- Normal : Sufficient for memory backup.
- Low : Remaining power insufficient for memory backup.
[3]
X
button
Close the Battery Status Window.
When the battery is very low on power, the LED just below the keyboard will start blinking red. A
very short time after the LED starts blinking, the unit will automatically power off. The battery
must be charged or replaced in this case.
If the main battery is disconnected in a situation in which the sub battery is low on power, the data
stored in the memory may be lost. If the sub battery must be replace, make sure the main battery
has sufficient power to hold the state of the unit while the sub battery is replaced.
Important
