TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
37 of 47
Basic Operations are available at all times unless access was disabled during configuration (See
Section 3.4.4). These functions allow for operations such as turning on the Backlight, Checking the
Main and Sub batteries, Adjusting the Sound and Touch Panel Calibration as well as the Alpha
keyboard Pop-up. The following is a description of each of the available basic functions.
4.1
Turning on the backlight
The screen backlight can be turned ON and OFF by holding the SFT key down and pressing the F2
key.
4.2
Battery Status
The equipment has a main and sub battery which charge automatically when either an AC adapter is
connected, or the unit is placed in a CIU or Vehicle Holder. To check the Battery Status, press and
hold the SFT key down and then press the ENT/SYS key. The following Window will be displayed.
[1] Main Battery
a. Status
- External: An AC adapter or Holder is connected.
- Normal: The battery is being used.
- Low : The main battery is low (25%) . It must be charged or replaced.
- Unknown: The operational state of the battery cannot be checked.
b. Percentage of the battery power left
Displayed as a percentage.
[2] Sub battery
a. Status
4
Basic Operations
