TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
11 of 47
The Application “Setup Menu” is used to define the application environment and define system
wide configuration settings, such as Suspend and Backlight timers. This “Setup Menu” is displayed
automatically after the Touch Screen calibration and the Date/Time settings. The “Setup Menu” is
only displayed if an application is loaded to start automatically or the re-install box has been tapped
(for details, see Section 5.3) after a memory loss. The following “Setup Menu” is presented to the
user for the equipment’s configuration and software installation.
3.1
Setup Menu
[1] Configure the operating environment via the Control Panel. For details, refer to Section 3.2.
[2] Application Installation from a storage card. For details, refer to Section 3.3.
[3] TeamPad Configuration. For details, refer to Section 3.4.
[4] Application Backup and Restore. For details, refer to Section 3.5
[5] Registry Editor. For details, refer to Section 3.6
[6] TeamPad Explorer. For details, refer to Section 3.7.
[7] Running a program. For details, refer to Section 3.8
[8] Run the defined startup program (if any) in debug mode. For details refer to Section 3.9.
3
Application Setup and Configuration