Fujitsu SPARC Enterprise T5140, Service Manual

Page: 213 / 240

Identifying FRUs in SPARC Enterprise T5140 Servers 187
The following table identifies the I/O components in the server and points to
instructions for servicing them.
TABLE:
I/O Components (SPARC Enterprise T5140 Servers)
Item FRU Replacement Instructions Notes FRU Name (If Applicable)
1 Top cover “Remove the Top Cover”
on page 67
“Install the Top Cover”
on page 177 Removing top cover if
the system is running
will result in immediate
shutdown. N/A
2 Left control panel light
pipe assembly “Servicing Front Control
Panel Light Pipe
Assemblies” on page 160 Light pipe bracket is not
a FRU. N/A
3 Hard drive cage and
hard drive backplane “Servicing the Hard
Drive Cage” on
page 151
,
“Servicing the Hard
Drive Backplane” on
page 156
Hard drive cage must be
removed to service hard
drive backplane and
front control panel light
pipes. /SYS/SASBP
4 Hard drives “Remove a Hard Drive”
on page 71
“Install a Hard Drive”
on page 73 Hard drives must be
removed to service the
hard drive backplane. See “Four-Drive Capable
Backplane Configuration
Reference” on page 77
or
“Eight-Drive Capable
Backplane Configuration
Reference” on page 78
5 DVD/USB module “Servicing DVD/USB
Modules” on page 144 Must be removed to
service the hard drive
backplane. /SYS/DVD
/SYS/USBBD
6 Right control panel light
pipe assembly “Servicing Front Control
Panel Light Pipe
Assemblies” on page 160 Light pipe bracket is not
a FRU. N/A