Fujitsu RDX USB 3.0 QuikStor Drive, Operating Manual

Page: 23 / 32

RDX USB 3.0 QuikStor Drive
23
5 Software installation
5.1 Windows
It is not required to install a driver under Windows OS. Windows recognizes the
drive as a removable disk and installs its native driver.
5.2 Linux
For Linux based operating systems (Novell SUSE, RedHat), it is not required to
install a disk driver. The disk drive can be accessed by using device handles. At
the terminal console type "dmesg" and scroll though the message to verify that
the disk drive has been detected by the USB controller.
For example, you can access the disk drive over the handles
/media/usbdisk
or
with the commands
mt
,
tar
,
cpio
and
dd
. Type
man command
at the console to get
detailed information.
5.3 Flashing the firmware
A firmware flash can be done under Windows by using the RDX Utility . The flash
tool can be found on the same locations as the RDX drivers. Please consult the
documentation that comes with the flash tool.