RDX USB 3.0 QuikStor Drive
27
Troubleshooting
6.7
Unit performance seems slow
For Linux users
Systems running Linux may see reduced performance when doing backups on
RDX cartridges configured for FAT32. For best performance configure the file
system on the RDX cartridges for ext2 or ext3.
Checking cable connections
For best performance, ensure to use an appropriate USB 3.0 cable.
6.8
A write error occurs
If the backup application reports a write error, follow these steps:
Ê
Verify that the write protect switch on the cartridge is set to the “unlock
position”.
Ê
Check the activity LED on the front of the cartridge. If this activity LED is
amber, the cartridge is not working properly. This may be due to severe
damage to the cartridge. Run the
RDX Utility
software to obtain more
information about the failure.
Ê
Replace the cartridge if the error persists.
Summary of Contents for RDX USB 3.0 QuikStor Drive
