12
RDX USB 3.0 QuikStor Drive
Quick Start Installation
2.1.4
Installation instructions
Proceed as follows to mount an RDX QuikStor drive:
Ê
Carefully unpack the drive and accessories.
Ê
Switch off the computer.
Ê
Open the computer cover, using a screwdriver if necessary.
Ê
Slide the RDX drive into an unused drive bay until the bezel is flush with the
front of the computer.
Ê
Mount the drive as appropriate for your server.
V
CAUTION!
Do not over-tighten the screws!
Figure 3: USB connector on RDX drive connector panel
1
Type B USB 3.0 connector on RDX QuikStor drive
3
Power connector on RDX QuikStor drive
Summary of Contents for RDX USB 3.0 QuikStor Drive
