Fujitsu PRIMERGY TX300 S3, Options Manual, Page: 69 / 109

TX300 S3
Options Guide 69
Controller in non-hot-plug PCI slots Installing a controller
Figure 60: Installing a controller
Ê
Install the controller in the PCI slot and press it carefully into the associated
plug-in location on the system board (1). Ensure that the rear cover fits into
the recess (a).
Ê Push the green fastening slider over the rear cover’s bracket (2).
Ê If required, connect the cables to the controller and other components.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter “Completion” on page 79 ff.
1
2
a