140
Upgrade and Maintenance Manual
TX1320 M4
Hard disk drives (HDD) and solid state drives (SSD)
7.3.4
Replacing a 3.5-inch non hot-plug HDD
7.3.4.1
Preliminary steps
Ê
"Locating the defective server" on page 47
Ê
"Locating the defective component" on page 48
Ê
"Shutting down the server" on page 49
Ê
"Getting access to the component" on page 51
7.3.4.2
Removing the defective 3.5-inch non hot-plug HDD
Ê
Remove the non hot-plug HDD, see section
7.3.4.3
Installing the new 3.5-inch non hot-plug HDD
Ê
Install the non hot-plug HDD, see section
"Installing a 3.5-inch non hot-plug
7.3.4.4
Concluding steps
Ê
Ê
"Connecting the power cord" on page 60
Ê
"Switching on the server" on page 63
Ê
If the HDD/SSD is configured using a RAID controller with a RAID level
higher than "0", the rebuild will start automatically, see section
a RAID array rebuild" on page 87
.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools:
tool-less
Summary of Contents for PRIMERGY TX1320 M4
