Fujitsu PRIMERGY TX1320 M4, Upgrade And Maintenance Manual

Page: 89 / 372

TX1320 M4
Upgrade and Maintenance Manual 89
Basic software procedures
Checking the label
Ê
If available, check the label on the controller.
Beside the part number, you may find the MAC address.
Using an UEFI BIOS
Ê
Enter the BIOS setup menu.
Ê
Select the Advanced menu.
The addresses are displayed at the Advanced menu main page.
I
Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.
LAN controller always provide the MAC addresses.
Using the iRMC web interface
Ê
Log into the ServerView iRMC web interface.
Ê
Open the System menu.
Ê
Open the Network page.
Ê
In the Ethernet Ports group, you will find detailed information on each
network controller in the managed PRIMERGY server, including its MAC
address.
I
This information is only available with the iRMC S5 or above.
Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.
I
For add-in cards the vendors provide documentation and tools, offered
on the Fujitsu support web pages:
http://ts.fujitsu.com/support/
Select the server, select Downloads - More Details - Driver .
Some vendors bundle the documentation together with the driver
package.
5.2.16.2 Looking for the WWN address of a fibre channel controller
There are several possible locations where these addresses can be found.
Ê
Inform the customer about the new or changed WWN address.