Fujitsu PRIMERGY TX120 S3, Upgrade And Maintenance Manual

Page: 294 / 440

294 Upgrade and Maintenance Manual
TX120 S3
Front panel and LAN connector
13.1 Replacing the front panel module
Note on system information backup / restore
I
The front panel module contains the Chassis ID EPROM that contains
system information like server name and model, housing type, serial
number and manufacturing data.
To avoid the loss of non-default settings when replacing the system
board, a backup copy of important system configuration data is
automatically stored from the system board NVRAM to the Chassis ID
EPROM. After replacing the system board the backup data is restored
from the Chassis ID board to the new system board.
V
CAUTION!
For that reason the front panel module and system board must not be
replaced simultaneously! In this case, restoring the system configuration
data on the system board would fail.
13.1.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Replacing the front panel module:
– Phillips PH2 / (+) No. 2 screw driver
13.1.2 Preliminary steps
Before replacing the front panel module, perform the following steps:
Ê
Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 79 .
Field Replaceable Units (FRU)
Average hardware task duration: 10 minutes
Average software task duration: 5 minutes