manualshive.com logo in svg

Fujitsu PRIMERGY RX4770 M6, Upgrade And Maintenance Manual, Page: 102 / 468

Share
Download
Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual Download Page 102

Note on the Driver Monitor of the ServerView Operations Manager

The 

Driver Monitor

 view gives you an overview of the monitored

components as well as the associated events contained in the system
event log on the managed server.

Under 

Monitored Components

 the monitored components are listed. If

a component has the status 

Warning

 or 

Error

, you can select it in the

list and click 

Acknowledge

. This confirms the event on the server side.

You may have to log on to the server beforehand. The status of the
component will then be reset to ok. To see the new status you must
refresh the 

Driver Monitor

 view with 

Refresh

.

For more information on how to view and sort the SEL using ServerView
Operations Manager, see the "ServerView Operations Manager - Server
Management" user guide.

Viewing the SEL using the iRMC S5 web interface

▶

Log in to the iRMC S5 web interface.

▶

Open the 

Logs

 menu.

▶

Click 

System Event Log

 to open the System Event Log page.

All events concerning the system are displayed in a table in the Event Log
Content group.

▶

You can sort the table based on a column using the arrows in the header
field.

▶

You can also filter the table using the filter lists in the header of some
columns.

Note on the Driver Monitor of the iRMC S5 web interface

The 

Driver Monitor

 view gives you an overview of the monitored

components.

If a component has the status 

Warning

 or 

Error

, you can click 

Reset

status

. You have to log on to the iRMC S5 web interface beforehand.

The status of the component will then be reset to ok. To see the new
status you must refresh the iRMC S5 web interface.

Basic software procedures

102

Upgrade and Maintenance Manual

RX4770 M6

Summary of Contents for PRIMERGY RX4770 M6





















































































































































































































































































































































































































































































Reviews:

No comments