Fujitsu PRIMERGY RX330 S1, Operating Manual, Page: 53 / 94

RX330 S1
Operating manual 53
Starting up and operation Controls and displays
5.1.2 Rear of server
Indicators on connection panel (global error indicator and ID indicator)
Figure 13: Global error indicator and ID indicator
1 ID indicator (blue)
Lights blue when the system has been selected by pressing the ID button
on the front. To deactivate, press the button again.
The ID indicator on the front also lights up at the same time. The two ID
indicators are synchronized.
The ID indicator can also be activated via ServerView and its status
reported to
ServerView
.
2 Global Error indicator (red)
Does not light up when the system is OK. No service incident or critical
event has occurred.
Lights up red when a predictable error has been detected. Users can check
the system and event log or via
ServerView
for more detailed information.
Flashes red when a critical event has occurred. Users can check BIOS
Setup, system- and eventlog or via
ServerView
for event details.
If the event is still acute after a power failure, the indicator is activated after
the restart.
2
1