manualshive.com logo in svg

Fujitsu PRIMERGY RX330 S1, Operating Manual, Page: 20 / 94

Share
Download
Fujitsu PRIMERGY RX330 S1 Operating Manual Download Page 20

20

Operating manual

 RX330 S1

Installation steps, overview

Ê

Configure the server and install the desired operating system and applica-
tions. The following options are available:

–

Remote configuration and installation with 

ServerStart

:

The 

ServerStart

 disc supplied allows you to conveniently configure the 

server and install the operating system. 

Details on how to operate 

ServerStart

, as well as some additional infor-

mation, can be found in the “PRIMERGY ServerView Suite - ServerStart” 
manual.

Configuration information can also be found in the 

“Configuration with 

ServerStart” on page 59

 section.

–

Local configuration and installation with or without 

ServerStart 

(see the 

“Configuration with ServerStart” on page 59

 section or the 

“Configuration 

without ServerStart” on page 60

 section).

I

You will find more information on installing the server remotely or 
locally in the 

ServerStart

 manual. This manual contains the installation 

steps (“Quick Step Guide”). A corresponding file in PDF format is 
included on the 

ServerBooks

 DVD.

Summary of Contents for PRIMERGY RX330 S1































































































Reviews:

No comments