manualshive.com logo in svg

Fujitsu PRIMERGY RX330 S1, Operating Manual, Page: 51 / 94

Share
Download
Fujitsu PRIMERGY RX330 S1 Operating Manual Download Page 51

RX330 S1

Operating manual

51

Starting up and operation

Controls and displays

Indicators on the drives

CD/DVD indicator

Lights up green when the storage medium is being accessed.

Drive access indicator (green)

Flashes green when an internal hard disk drive is being 
accessed.

Global Error indicator (red)

Does not light up when the system is OK. No service incident or 
critical event has occurred.

Lights up red when a predictable error has been detected. Users 
can check the system and event log or via 

ServerView

 for more 

detailed information. 

Flashes red when a critical event has occurred. Users can check 
for event details in the BIOS Setup, the system and event log or 
via 

ServerView

. 

If the event is still acute after a power failure, the indicator is 
activated after the restart.

ID

ID indicator (blue)

Lights up blue when the system has been selected by pressing 
the ID button. To deactivate, press the button again.

The ID indicator can also be activated via 

ServerView

 and its status 

reported to 

ServerView

.

!

Summary of Contents for PRIMERGY RX330 S1































































































Reviews:

No comments