Fujitsu PRIMERGY RX2520 M4, Upgrade And Maintenance Manual, Page: 95 / 456

RX2520 M4
Upgrade and Maintenance Manual 95
Basic software procedures
5.2.18.2 After replacing a system board
I
The following procedure must be done for each system board that is
replaced.
Ê
Confirm with the customer whether the onboard LAN controller you have
replaced has been used as part of a LAN teaming configuration.
Ê
If LAN teaming has been active, you will need to restore the configuration
using the LAN driver utility or OS teaming software.
I
For more information, see the relevant LAN driver manual.
5.2.19 Switching off the ID indicator
Press the ID button on the front panel, or use the iRMC web interface or
ServerView Operations Manager to switch off the ID indicator after the
maintenance task has been concluded successfully.
I
For more information, see section "Locating the defective server" on
page 45 or the "ServerView Suite Local Service Concept (LSC)" and
"iRMC S5 - Web Interface" user guides.
Using the ID button on the front panel
Ê
Press the ID button on the front panel to switch off the ID indicators.
Using the ID icon in the RMC web interface
Ê
Log in to the iRMC S5 web interface.
The icon that represents the ID indicator LED resides on the right of the
menu bar. Its color symbolizes its status:
blue : the ID LED is on.
grey : the ID LED is off
Ê
Click the icon to switch the ID indicator LED on or off.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch off the ID indicator.