Fujitsu Primergy RX100 S3 User Manual Download Page 62

Page: 62 / 287

Chapter 3 OS Installation Using ServerStart

2. Click [Details] and modify the settings as necessary.

The partition configuration is displayed. As the default values are configured, confirm the

settings and modify them as necessary.

3.1.4 OS Installation Wizard

Set computer information, user information, and the network protocol.

ServerStart can configure multiple network patterns. When configuring a domain controller, refer to

"Using ServerStart to Configure the Network".

The setup window differs depending on the OS to be installed. The following describes operations on

Windows Server 2003 R2.

To install another OS, interpret Windows Server 2003 R2 as your OS.

Click [Operating System Wizard: Operating system parameters].

The [Windows Installation] window appears.

Summary of Contents for Primergy RX100 S3
































































































































































































































































































Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands

Fujitsu Primergy RX100 S3, User Manual

Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands