Fujitsu Primergy RX100 S3 User Manual Download Page 127

Page: 127 / 287

127

PRIMERGY RX100 S3 User’s Guide

Manu

al O
S

allation

4.3 Installing the LAN Driver

This section explains the procedure for installing the driver.

In addition to the case where the OS is installed manually, the driver must be installed

when a LAN card is added.

4.3.1 Installing the LAN Driver (Windows Server 2003 x64)

Perform the following procedures on all LAN device names under [Network adapters] in [Device

Manager].

Click [Start]

→

[Administrative Tools]

→

[Computer Manager].

Click [Device Manager].

Double-click a LAN device name under [Network adapters].

Names of the LAN devices are displayed as follows.

Insert the driver disk created from the ServerStart CD-ROM into the server.

Click [Update Driver] in the [Driver] tab window.

The "Welcome to the Hardware Update Wizard" window appears.

Check [No, not this time] and click [Next].

Select [Install the software automatically (Recommended)] and click [Next].

The driver will be installed.

Click [Finish].

Click [Close] to close the properties window.

table: LAN device name

LAN cards

LAN device name

Onboard LAN (1000BASE-T)

Broadcom NetXtreme Gigabit Ethernet

PG-1852

Intel(R) PRO/1000 MT Desktop Adapter

PG-1862

Intel(R) PRO/1000 MT Dual Port Network Connection

PG-1882L

Intel(R) PRO/1000 MF Server Adapter

PG-1892L

Intel(R) PRO/1000 MT Server Adapter

Summary of Contents for Primergy RX100 S3
































































































































































































































































































Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands

Fujitsu Primergy RX100 S3, User Manual

Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands