279
PRIMERGY RX100 S3 User’s Guide
Ap
pend
ix
A
C
Remote Control Function and
Console Redirection
When a personal computer (PC) is connected to the serial port of this server with a
cross cable, the server can be turned on/off or reset from the PC via RS-232C
(remote control function). Console redirection can be performed in the same manner.
To use the reset function via RS-232C, the terminal software on the PC must have the same
communication speed and flow control mode settings as those on the Remote Control Utility.
C.1
Connecting the Server to a PC
Connect the server to a PC using a cross cable.
C.2
Operating the Remote Control Utility
The following explains how to operate the Remote Control Utility.
In the BIOS Setup Utility, perform the following setting. On the "8.1.6 Peripheral Configuration
pg.209), change [Serial Multiplexer] to [BMC].
[Server (Rear)]
[Personal computer]
Cross cable
Serial port
Serial port
