Fujitsu Primergy RX100 S3 User Manual Download Page 170

Page: 170 / 287

170

Chapter 6 High Reliability Tools

6.1 RAID Management Tool [Global

Array Manager]

RAID Management Tool is software that performs array configuration, disk

initialization and disk array monitoring. For more details, refer to "Onboard SCSI

RAID User’s Guide".

OS installation using ServerStart

If the OS is installed using ServerStart, RAID Management Tool is installed with the OS and other high

reliability tools.

6.1.1 Installing RAID Management Tool (Global Array

Manager)

To Install RAID Management Tool individually using the standard installer, follow the procedures

below.

Before installing Global Array Manager, check that TCP/IP is installed and works properly.

Exit all programs before starting installation.

Installation will fail if “Event Viewer” or “Computer Management” is run.

Log on to the server with administrator privileges.

Insert the SCSI Array Controller Document & Tool CD V6.0L10. Click [Start]

→

[Run...].

Enter a name in the [Open:] field as follows and click [OK].

[CD-ROM drive]:\RAIDTOOL\GAM\Windows\install.bat

Installation starts and the wizard window appears.

For subsequent procedures, refer to "Onboard SCSI RAID User’s Guide".

●

When an error screen appears after installation (Windows Server 2003 only)

If Windows Server 2003 Service Pack 1 is applied, the following message may appear on restarting after

installing/uninstalling RAID Management Tool (Global Array Manager).

There is no problem with operations. Click [Close Message] to close the message.

In order to protect the computer, this program is terminated by

Windows.

Name: SNMP Service

Summary of Contents for Primergy RX100 S3
































































































































































































































































































Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands

Fujitsu Primergy RX100 S3, User Manual

Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Brands by name

Popular brands