Fujitsu Primergy RX100 S3 User Manual Download

Page: 54 / 287

Chapter 3 OS Installation Using ServerStart

3.1 Guided Mode

In guided mode, follow the wizard to specify hardware configuration and the OS to be

installed, save the information necessary for installation in a configuration file, and

install the OS.

3.1.1 Starting Up the Guided Mode

Start up the guided mode.

Please confirm the floppy disk drive of the USB connection has been connected before turning on the

power supply of the Server.

Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.

ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.

Summary of Contents for Primergy RX100 S3
































































































































































































































































































Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Related manuals for Primergy RX100 S3

Brands by name

Popular brands

Fujitsu Primergy RX100 S3, User Manual

Search results

Summary of Contents for Primergy RX100 S3

Reviews:

Related manuals for Primergy RX100 S3

Brands by name

Popular brands