U41271-J-Z156-2-76
77
System Components and Expansions
The HDD Subsystem
If a hard disk drive module has been removed and no new module is installed
in its place, then install a dummy module in the empty bay. Make sure that the
dummy module engages properly in the bay.
Installing a Hard Disk Drive Module
Figure 30: Installing a hard disk drive module
Ê
Push the hard disk drive module into the bay (1) as far as possible and then
swing down the module handle completely to enable the locking mechanism
to engage (2). Ensure that the locking button (4) (see figure 28 on page 74)
slides into the designated opening.
Removal is performed in the reverse order.
V
CAUTION!
Never pull out a hard disk drive module during operation if you are not
sure that it is operated on a RAID controller and is part of a disk array that
operated in the mode RAID Level 1 or 5.