52
U41271-J-Z156-2-76
The Control Panel
Preparation for use and operation
Example for possible system information messages
A few examples of system information messages which can be entered with the
SCU
tool are given below:
Server name (node)
System ok
IP address
Cluster address
Operating system and version
No. of CPUs and frequency in MHz
Memory in Mbyte
Type/no. of PCI boards
NICs
DACs with configuration/no. of channels and HDDs
System Error Mode
If serious system errors occur during operation, the system display automati-
cally switches to the system error mode and displays the error. Each error
message consists of two lines. The first line contains the error description, the
second line contains the data and the time the error occurred. All error
messages are stored in a non-volatile memory. The history of the error
messages can be viewed at any time by switching from the system information
mode to the system error mode (via the menu toggle switch) and scrolling back
through the error messages.
Some of the system error messages which can appear on the system display
are described in section “Error Messages on the Control Panel” on page 68.
