Fujitsu PRIMERGY CX122 S1, Service Supplement Manual

Page: 86 / 94

84 Service Supplement
PRIMERGY CX122 S1
Replacing the power supply unit
4.8 Replacing the power supply unit
Ê Open the server as described in section "Opening the server" on page 31 .
Ê Remove all components except the power supply unit from the chassis as
shown in the related sections:
– Heat sinks: section "Removing a heat sink" on page 58
– Processors: section "Removing a processor" on page 60
– Memory modules: section "Removing a memory module" on page 73
– Expansion cards: section "Replacing expansion cards" on page 48
– PCI riser card: section "Replacing the PCI riser card" on page 53
– System board: section "Replacing the system board" on page 77
A pre-assembled replacement
chassis / PSU kit is available
under the following part
number:
S26361-K1378-V900
I
The CX122 S1 PSU
(460 W, open frame) is
not available as a
separate spare part.