PRIMERGY 10GbE Connection Blade 18/8 User Guide
11 / 95
2.3
Setting up serial console connection
This section shows how to set up serial console connection to access connection blade CLI
Step1:
Connect MMB and PC console port with a console cable. Or use a telnet / SSH session to the MMB
Step2:
Configure terminal software in PC as follows.
- 8 data bits, 1 stop bit and no parity
- 115200 baud
- No flow control
Step3:
Login MMB CLI. (username : admin, password : admin in default)
Step4:
Enter
3
in Console Menu.
Console Redirection Table Menu appears.
+-----------------------------------------------------------------------------+
| Console Redirection Table page_3
+-----------------------------------------------------------------------------+
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout : 900
Enter selection or type (0) to quit:
Step5:
Enter the connection blade number which you’d like to configure.
+------------------------------------------------------------------------------+
| Console Redirect Connection Blade page_3_1
+------------------------------------------------------------------------------+
(1) Console Redirect Connection Blade-1
(2) Console Redirect Connection Blade-2
(3) Console Redirect Connection Blade-3
(4) Console Redirect Connection Blade-4
(5) Console Redirect Connection Blade-5
(6) Console Redirect Connection Blade-6
Enter selection or type (0) to quit:
3