PRIMERGY 10GbE Connection Blade 18/8 User Guide
36 / 95
3.7
Configuring Spanning Tree
This section describes how to configure STP.
3.7.1
Configuring STP
<Configuration target>
Enable STP
Assign Interface0/17 and 0/26 to VLAN(VID10)
<Commands>
Assign Interface0/17 and 0/26 to VLAN(VID10)
(config)#interface range 0/17-0/26
(config-if)#vlan untag 10
Enable STP in Interface0/1 and 0/2.
(config)#interface range 0/1-0/2
(config-if)#stp use on
Save the configuration
(config)#save
Switch
Switch