PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 7 / 23
2.3
Configure serial console connection
This section shows how to set up serial console connection to access connection blade CLI
Step1:
Connect MMB and PC console port with a console cable. Or use a telent / SSh session to the MMB
via LAN.
Step2:
For serial console connection, configure terminal software in PC as follows.
- 8 data bits, 1 stop bit and no parity
- 115200 baud
- No flow control
Step3:
Login MMB CLI. (username : admin, password : admin by default)
In case of BX900 chassis
Step4:
Enter
3
in Console Menu.
Step5:
Console Redirection Table Menu appears. Then select 1 to open
Console Redirect Connection Blade Menu
Step6:
Enter the connection blade number which you’d like to configure. Then, we can access Connection
Blade’s CLI
+-----------------------------------------------------------------------------+
| Console Menu page_root
+-----------------------------------------------------------------------------+
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update
(5) Logout
(6) Reboot Management Blade
(7) System Information Dump
(8) Command Line Interface
(9) Account Management
Enter selection:3
+-----------------------------------------------------------------------------+
| Console Redirection Table page_3
+-----------------------------------------------------------------------------+
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout : 900
Enter selection or type (0) to quit:1
+------------------------------------------------------------------------------+
| Console Redirect Connection Blade page_3_1
+------------------------------------------------------------------------------+
(1) Console Redirect Connection Blade-1
(2) Console Redirect Connection Blade-2
(3) Console Redirect Connection Blade-3
(4) Console Redirect Connection Blade-4(5) Console Redirect Connection Blade-5
(6) Console Redirect Connection Blade-6
Enter selection or type (0) to quit:3