![background image](http://html.mh-extra.com/html/fujitsu/primergy-10-40gbe/primergy-10-40gbe_user-manual_120981016.webp)
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 16 / 23
Schedule information
None
Host database information
None
4.2
IBP Mode
Item
Default Setting
Switching method
Cut through switching
Port information
ETHER port
1~18
(Downlink)
19~26
(Uplink)
27,31
(Uplink)
oob
(
MMB connection link
)
Data transfer rate
10Gbps
10Gbps
40Gbps
10/100Mbps
(Auto-detect)
Full/half duplex
Full-duplex
(Fixed)
Full-duplex
(Fixed)
Full-duplex
(Fixed)
Auto-detect
Flow control
Tx:OFF, Rx:ON
Tx:ON(Fixed)
Rx:ON(Fixed)
Uplink Set
-
default
-
-
Port Group
default
default
-
-
VLAN Port Group
-
-
-
-
Service LAN
-
-
-
-
Service VLAN
-
-
-
-
Link State
Enabled
Link aggregation
Load balancing algorithm
Destination MAC address, Source MAC address
Back up port
Port selection scheme
Master port preferred
LLDP
Disabled
Broadcast/Multicast storm control
Enabled
Threshold value: 7.5Mpps
Converged Enhance Ethernet
Disabled
Output rate control
Disabled
Reflective Relay
Disabled
IGMP snooping
Enabled
MLD snooping
Enabled
IEEE802.1X authentication
Disabled
MAC address authentication
Disabled
RADIUS client
Disabled
client
Disabled
LDAP Client
Disabled
IP interface
In-band = None/OOB = DHCP
Password information
User name
admin
Password
admin
ACL information
None
SNMP information
Disabled
DHCP/DNS client
Enabled on oob
telnet/SSH auto logoff
5 min
Console auto logoff
8 hours
System log information
System log send
Disable
Facility
23
(
local7
)
Priority
error
、
warn
、
info
Automatically current time set
TIME or SNTP protocol advertised by DHCP server
Schedule information
None
Host database information
None