PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 10 / 23
2.6
Checking version and system information
System information can be seen by show system information command
1) Current time
Current time is displayed
2) Startup time
The time when system booted up is displayed
3) Hardware Version
Hardware version is displayed
4) Number of ports
The port number of 10/40GbE is displayed (downlink ports/uplink ports)
5) Machine Model
Machine model is displayed
6) ROM Ver.
Boot ROM version is displayed.
7) Firm Ver.
Firmware version is displayed
8) Startup-firmware
Current operating software mode (switch_firm or ibp_firm or ehm_firm) is displayed
9) Next-boot
Software mode in next boot is displayed
10) Startup-config
Startup config information is displayed. (date and time when saved config)
11) Running-config
Running config information is displayed (date and time when applied current config)
12) MAC
MAC address is displayed
13) Memory
Memory size implemented in this product is displayed
# show
△
system
△
information
Current-time : Sat Apr 11 20:24:33 GMT 2012
-------1)
Startup-time : Sat Apr 11 20:14:22 GMT 2012
-------2)
Hardware Version : 01-10
-------3)
Number of ports : 18/8+2
-------4)
Machine Model : PY CB Eth Switch 10/40Gb 18/8+2
-------5)
ROM Ver. : 1.6
-------6)
Firm Ver. : V01.00 NY0020 Fri Jan 10 21:04:40 JST 2014
-------7)
Startup-firmware : ehm_firm
-------8)
Next-boot : ehm_firm
-------9)
Startup-config : Thu Jan 1 00:00:00 GMT 1970 config1
-------10)
Running-config : Sat Apr 11 20:14:22 GMT 2012
-------11)
MAC : 001742d10960
-------12)
Memory : 512MB
-------13)