![background image](http://html.mh-extra.com/html/fujitsu/primergy-10-40gbe/primergy-10-40gbe_user-manual_120981013.webp)
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 13 / 23
Backup by TFTP server can be done as following. (On the assumption that TFTP server is already prepared.)
This command example shows storing config1 as the name of <file name> to TFTP sever.
Restore by TFTP server can be done as following. (On the assumption that TFTP server is already prepared.)
This command example shows downloading <file name> from TFTP server as config1. Then reset the
switch by assigning next-boot configuration file
Restring the configuration by FTP/TFTP needs the switch reboot.
2.7.5
Clearing Configuration
Clearing the configuration can be done by reset clear command.
2.8
Updating Firmware
Updating Firmware can be done by FTP as the following procedures.
(This example is on Window OS command prompt.)
The new firmware is applied after reset.
In case of TFTP, updating firmware can be done as the following.
#copy
△
config1
△
tftp://<tftp server IP address>/<file name>
#copy
△
tftp://<tftp server IP address>/<file name>
△
config1
……
#reset
△
config1
#reset
△clear
C:<config>ftp
△
192.168.1.10
#Connect with FTP to Connection Blade
User (192.168.1.100:(none)): admin
#Enter User Name
331 Password required for admin.
Password:admin
#Enter Password
230 User admin logged in.
ftp> bin
#Change to binary mode
200 Type set to I
ftp> put
△
SBAX3V0XXXBIND_NYXX_NJXX
△
bindfirm
#Update firmware
・
・
226 Write complete
2856 bytes sent in 1.10 seconds (2.44 Kbytes/s)
ftp>get
△
reset
#Restart connection blade
・
・
ftp>bye
#exit FTP access
#copy
△
tftp://<tftp server IP address>/<f/w file name>
△
switch_firm
#Update firmware
……
#reset
#reboot